Wait 15 minutes after last alcohol intake or drink a glass of water
before testing.
1. Bring the pouch to room temperature (15-30 °C or 59-86 °F)
before opening. Remove the Test from the sealed pouch. Do not touch
the Mouthpiece to avoid contamination.
2. Hold the middle of the Test. Firmly squeeze the Test to break
the Inner Glass Tube. Perform the test as soon as possible to avoid
the affects of humidity. Do not crush or bend the Test. Refer to
the picture below.
3. Breathe into the Test.
· For Breath Alcohol Test without blow bag:
· Hold the middle of the Test horizontally. Take a deep breath.
Blow hard into the Mouthpiece, in the same direction as the Test
Arrows. Blow hard in one continuous breath for 12 seconds.
Note: Failure to blow hard, or in one continuous breath for 12 seconds,
may cause false results. Do not inhale while blowing into the Test.
Refer to the illustration below. Shake the Test slightly to
distribute the crystals evenly in the Test Window.
· For Breath Alcohol Test with blow bag:
· Insert the Test into the Air Seal Neck of the blow bag in the
same direction as the Test Arrows. Roll the Test into the blow bag
until the Test Window is completely covered. Ensure the End of the
Test is past the Air Seal Neck of the blow bag. Refer to the
illustration below.
· Hold the middle of the Test horizontally. Take a deep breath.
Blow hard into the Mouthpiece of the Test until the blow bag is
completely inflated.
Note: Failure to blow hard, or to inflate the blow bag completely, may
cause false results. Do not inhale while blowing into the Test.
· Remove the Test from the blow bag. Shake the Test slightly to
distribute the crystals evenly in the Test Window.
4. Read results at 2 minutes by looking at the color of the
majority of crystals. Do not read results after 5 minutes.
| Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
|
| DAL-902 | Breath Alcohol Test (With/Without Blow bag) | Breath | Cassette | 15T/20 T | 0.08% | CE |
INTERPRETATION OF RESULTS
For best results, compare the crystals from the used Test to the
crystals from an unused Test of same cut-off level.
NEGATIVE: Majority of the crystals remain yellow-orange. The relative BAC is
below the cut-off level of the Test. The crystals may be lighter
than the crystals from an unused Test.
POSITIVE: Majority of the crystals are green-blue. The relative BAC is at or
above the cut-off level of the Test.
