Refer to Fiatest TM Go Fluorescence Immunoassay Analyzer Operation Manual for the
complete instructions on use of the Test. The test should be
conducted in room temperature.
Allow the test, specimen, buffer and/or controls to reach room
temperature (15-30°C) prior to testing.
1. Turn on the Analyzer power. Then according to the need, select
“standard test” or “Quick test” mode.
2. Take out the ID card and insert it into the Analyzer port.
3. Serum/Plasma: Pipette 50μL serum/plasma into the buffer tube,
mix the specimen and the buffer well.
4. Whole blood: Transfer 75μL whole blood into the buffer tube with
pipette; mix the specimen and the buffer well.
5. Add diluted specimen with a Pipette: Pipette 85μL diluted
specimen into the sample well of the test cassette. Start the timer
at the same time.
6. There are two test modes for Fiatest TM Go Fluorescence Immunoassay Analyzer, Standard Test mode and Quick
Test mode. Please refer to the user manual of Fiatest TM Go Fluorescence Immunoassay Analyzer for details.
“Quick test” mode: After 15 minutes of adding sample,Insert the
test cassette into the Analyzer, click “QUICK TEST”, fill the test
information and click "NEW TEST" immediately. The Analyzer will
automatically give the test result after a few seconds.
“Standard test” mode: Insert the test cassette into the Analyzer
immediately after adding specimen, click “STANDARD TEST”, fill the
test information and click "NEW TEST" at the same time, The
Analyzer will automatically countdown 15 minutes. After the
countdown, the Analyzer will give the result at once.
| Catalogue Number | Item Name | Sample | Test Range | KIT size |
| FI-HFA-402 | H-FABP Test Cassette | WB/S/P | 1-120 ng/mL | 10T/25 |
